Automatic Numbering - Mitsubishi R56TB Instruction Manual

11.1.11. Automatic numbering

When MELFA-BASIC IV is used, the line number can be generated by the automatic operation in the
command edit screen.
This function automatically displays the next line number each time the edit command dialog is displayed. The
start line No. and line pitch can be designated with the setting dialog.
1) The setting dialog will appear when "Auto Number setting" (<a>) is selected under the ［Menu］ button of
the command edit screen.
<a>
2) Input start Line number into "Start line#" and Line pitch into "Line pitch".
Inputs from the keyboard which taps the ［Edit］ button (<b>) and is displayed.
3) Preparation will be completion, if the input is completed, the [OK] key (<c>) of the keyboard (ten key) will be
tapped and the [OK] button (<d>) of the setting screen of the automatic row number will be tapped.
After this, the row number is set up automatically when [Add] button (<e>) is tapped. (<f>)
When creating the program newly, display the start row number set up by above-mentioned "2)."
Display the next of the last row number during the existing program edit.
<e>
<b>
<d>
<f>
49
<c>