Starter unit
Dismantling
Mod. 650, 700, 950
Remove the screw in the centre of the
pulley and lift off the pulley.
Dismantle the spring cassette.
!
WARNING!
The return spring in the spring cass-
ette is pre-tensioned and can if not
handled carefully during dismant-
ling/fitting fly out and cause perso-
nal injury.
Mod. 1250
Remove the screw in the centre of the
pulley and lift off the pulley.
Make sure that the return spring is
completely released, and dismantle the
pulley.
!
WARNING!
The return spring is not placed in a separate cassette but is placed directly in the
starter unit cover.
Observe care during dismantling/assembly, the spring can fly out and cause
personal injury.
Dismantling
Mod. 650, 700, 950
Remove the screw in the centre of the
pulley.
Lift off the pulley.
Remove the screws and lift off the spring
cassette.
!
WARNING!
The return spring in the spring cass-
ette is pre-tensioned and can if not
handled carefully during dismant-
ling/fitting fly out and cause perso-
nal injury.
Mod. 1250
Remove the screw in the centre of the
pulley and lift off the pulley.
Make sure that the return spring is
completely released.
Remove the screw and washer in the
centre of the pulley.
Carefully lift off the pulley.
1
7