Partner K 650/700 Active Workshop Manual page 74

Crankshaft and crankcase
Models 650, 700 – Carburettor side
Remove the carburettor from the cylinder.
Fix cover washer No. 506 34 45-01 to the cylinder with an M5x15 screw.
506 34 45-01
Models 650, 700 – Crankcase lubrication hole
Remove the centrifugal clutch and seal the lubrication hole with tape.
Model 950 – Muffler side
Remove the cutting equipment, silencer and heat shield plate.
Put cover wahser No. 502 71 39-01 between the silencer and the cylinder.
Tighten the muffler screws.
502 71 39-01
Model 950 – Carburettor side
Remove the carburettor from the cylinder.
Fix cover washer No. 506 34 45-01 to the inlet pipe with an M5x15 screw.
506 34 45-01
6
73