Partner K 650/700 Active Workshop Manual page 64

A
A
B A
D
D
E
Crankshaft and crankcase
Remove the vibration damper by the rear
handle by removing screws (A) and one
half of the handle (B).
505 38 13-08
Remove the screw (C) and release the
screws (D)
Dismantle and then replace the vibration
damper (E).
C
505 38 13-08
Mod. 950
Vibration damper at cylinder
Remove the screw which holds the vibra-
tion damper to the grip.
Dismantle the damper from the cylinder.
502 50 18-01
Mod. 950
Front vibration damper
Dismantle covers, air filter and muffler.
Remove the screws which hold the dam-
per to the grip and crankcase.
502 50 18-01
In order to dismantle the vibration dam-
per in the rear handle the screws (A) must
be dismantled and the handle half (B)
removed.
Remove the screw (C) and release the
screws (D) enough to dismantle the vi-
bration damper (E) for replacement.
Assembly is conducted in the reverse
order to dismantling.
Mod. 950
Vibration damper at cylinder
1. Dismantle covers and air filter to
simplify access.
2. Remove the screw which holds the
vibration damper to the grip.
3. Insert key 502 50 18-01 in the centre
of the vibration damper and unscrew
the screw which holds the damper to
the cylinder.
Mod. 950
Front vibration damper
1. Dismantle covers, air filter and muff-
ler.
2. Remove the screw which holds the
vibration damper to the grip (at the
cylinder).
3. Remove the screw which holds the
damper to the crankcase.
6
63