Related Manuals for Partner K30
Summary of Contents for Partner K30
- Page 1 K30, K40 Operator ′ s manual Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
-
Page 2: Key To Symbols
KEY TO SYMBOLS Key to symbols WARNING! The machine can be a dangerous tool if used incorrectly or carelessly, which can cause serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. -
Page 3: Table Of Contents
CONTENTS Contents KEY TO SYMBOLS Key to symbols ............. CONTENTS Contents ..............WHAT IS WHAT? What is what on the power cutter? ....... SAFETY INSTRUCTIONS Steps before using a new power cutter......Personal protective equipment ........Machine ′ s safety equipment ........Checking, maintaining and servicing the machine ′... -
Page 4: What Is What
WHAT IS WHAT? What is what on the power cutter? 1 Cutting blade 11 Rating plate 2 Flange washer 12 Switch 3 Guard for the blade 13 Water connection with filter 4 Catch for the guard 14 Belt guard 5 Front handle 15 Belt tensioner 6 Water tap 16 Cutting arm... -
Page 5: Safety Instructions
”Assembly”. • Check that the air hose is in full working order and in good condition. Let your Partner dealer check the power cutter and make essential adjustments and repairs. • Use leg-guards recommended for the material to be cut. -
Page 6: Checking, Maintaining And Servicing The Machine ' S Safety Equipment
SAFETY INSTRUCTIONS Switch lock Checking the starting and stopping functions of the switch The switch lock is designed to prevent accidental operation of the switch. When the lock (A) is pressed in this releases the Start the machine, release the switch, and check that the switch (B). -
Page 7: General Safety Precautions
SAFETY INSTRUCTIONS Checking the blade guard General working instructions WARNING! Always check that the guard is correctly fitted before starting the machine. Check that the cutting blade is fitted correctly and does not show signs of WARNING! This section describes basic damage. - Page 8 SAFETY INSTRUCTIONS Cutting • Move the blade slowly forwards and backwards to achieve a small contact area between the blade and the material to be cut. This reduces the temperature of the blade and WARNING! The safety distance for the power ensures effective cutting.
-
Page 9: Cutting Blades
SAFETY INSTRUCTIONS What is kickback? Cutting blades The word kickback is used to describe the sudden reaction that causes the power cutter and cutting blade to be thrown WARNING! A cutting blade may burst and from an object when the upper quadrant of the blade, known cause injury to the operator. -
Page 10: Diamond Blades
SAFETY INSTRUCTIONS Diamond blades Special blades Some cutting blades are designed for stationary equipment Diamond blades consist of a steel body provided with and for use with attachments.Such cutting blades must not be segments that contain industrial diamonds. used on portable power cutters. Diamond blades ensure lower costs per cutting operation, Always contact local authorities and make sure you are fewer blade changes and a constant cutting depth. -
Page 11: Assembly
Do not use warped, notched, indented or dirty flange washers. Do not use different dimensions of flange washers. Partner’s blades are approved for hand-held power cutters. Blades are manufactured with three different diameters of centre holes: 20 mm (0.787"), 22.2 mm (7/8") and 25.4 mm (1"). -
Page 12: Starting And Stopping
STARTING AND STOPPING Starting and stopping WARNING! Note the following before starting: Make sure you have a secure footing and that the cutting blade cannot touch anything. Keep people and animals well away from the working area. Starting • Grip the front handle with the left hand. •... -
Page 13: Maintenance
MAINTENANCE Maintenance Checking the drive axle and flange washers Check that the threads on the drive shaft are undamaged. Check that the contact surfaces on the blade and the flange washers are undamaged, of the correct dimension, clean, WARNING! Always disconnect the machine and that they run properly on the drive axle. -
Page 14: Daily Maintenance
7 Check that the available compressor provides the correct air pressure, 7 bar and the correct air volume of 2.8-3.5 m3/min for K40 and 2.0-2.4 m3/min for K30. 8 Use an air hose that is at least 3/4' (19 mm). -
Page 15: Technical Data
Partner Industrial Products, SE-433 81 Partille, Sweden, tel: +46-31-949000, declares under sole responsibility that the power cutter Partner K30, K40 dating from 2005 serial numbers and onwards (the year is clearly stated on the rating plate, followed by the serial number), complies with the requirements of the COUNCILíS DIRECTIVE: of June 22, 1998 ”relating to machinery”... - Page 16 1088909-26 ´®z*xz|¶6h¨ ´®z*xz|¶6h¨ 2005-11-16...