Fuel Filter - Partner K 650/700 Active Workshop Manual

3
A
A
22
Fuel system

Fuel filter

Mod. 650, 700
The fuel filter can be taken out through
the tank's filler hole.
502 50 83-01
Clean the filter externally if it is not too
severely fouled.
Replace the filter if necessary.
Mod. 950, 1250
The easiest way to take the fuel filter out
through the fuel tank refill hole is with tool
502 50 83-01.
502 50 83-01
Fuel hose
All models
Remove the fuel filter and connect
pressure tester No. 501 56 27-01. Pump
up the pressure to about 100 kPa and
observe whether any bubbles are for-
med.
30
200
250
150
15
300
100
350
50
400
0
501 56 27-01
Fuel filter
Mod. 650, 700
On the fuel pipe in the tank there is a fuel
filter. This is accessible through the filler
hole. Pull out the filter with your fingers or
by means of tool 502 50 83-01.
Remove the tank cap completely.
If the filter is not too severly fouled it can
be cleaned externally by means of a brush.
Otherwise it must be replaced.
Check the fuel pipe for cracking and
leakage.
NOTE!
Make sure that the filter's connecting collar
is pressed as far as possible in the fuel
pipe.
Mod. 950, 1250
The fuel filter is located on the hose in the
fuel tank. It is accessible through the refill
hole.
Remove the tank fuel cap completely.
Pull out the filter with tool 502 50 03-01.
Pull the metal ring (A) from the filter
connection and then pull the filter off the
hose to either clean it or replace it.
Fuel hose
All models
Remove the fuel filter and connect
pressure tester No. 501 56 27-01.
Pump up the pressure to about 100 kPa.
Leakage and cracks in the hose are easy
to detect if any bubbles are formed.