Play To Outputs; Lcd Brightness; Led Brightness; Transport Keys - Zaxcom Nomand User Manual

MAIN MENU

Play to Outputs

Play to outputs allows nomad to play its record track to its output busses.

LCD Brightness

This menu is where the brightness of the LCD screen is set.

LED Brightness

This menu is where the brightness of Nomad's LEDs is adjusted. Please note this is a global setting meaning that
all LED lights will be set to the same brightness.

Transport Keys

There are two ways that the multi-function keys can be set to control the way Nomad will go into record, stop and
playback.

Shifted Mode

If the transport key is set to shifted mode and the TC, A-MIX or ZNET key is pressed the menu associated with
those keys will open. When set to shifted mode to go into record, playback or stop, the keys will need to be
shifted. To shift the keys press the MENU knob while simultaneously pressing the REC, PLAY or STOP key. While in
shifted mode it is still possible to directly go into record, play and stop with a single key press by pressing and
holding the key for 1.5 seconds.

Unshifted Mode

If the transport key is set to unshifted mode and the REC, PLAY or STOP keys are pressed Nomad will go into
record, playback or stop. In unshifted mode to display the TC, A-MIX or ZNET menus, it is necessary to press the
MENU knob while pressing the TC, A-MIX or ZNET key.

Tone Frequency Adjust

From the tone frequency adjust menu the frequency of the reference tone can be changed. The tone is adjustable
from 20 to 20,000 Hz.

Tone Level

The tone level menu adjusts the output level of reference tone. The range is -90 to 0dB.
Please note it is recommended for most applications to keep the tone level set at -20dB

AES-42 Enable

This menu is where power for AES-42 microphones is engaged. AES-42 microphones are on AES 1 and 2 inputs.
47
ENG Setup Menu