Autotrim; Autopan - Zaxcom Nomand User Manual

MAIN MENU

AutoTrim

AutoTrim is a feature that makes the menu knob act an individual trim knob for all analog inputs. When
AutoTrim is turned on and a fader is adjusted the blue LED next to that fader will illuminate indicating the
input routed to that fader will be trimmed when rotating the menu knob. When another fader is nudged, the
trim function will move to that input.
Input being controlled

AutoPan

AutoPan is a feature that causes the COM key act as a pan knob. When AutoPan is turned on and a fader is
adjusted the blue LED next to that fader will illuminate indicating the input routed to that fader will be panned
when the COM key is pressed. AutoPan is active from any meter screen.
When pressing the COM key the panning for the illuminated channel will cycle from left to center to right to
blank - unless "Prevent Empty Pan" is turned ON in the ENG advanced menu - then the blank option will not
be cycled through.
When panning with AutoPan the headphone display will temporally display which position that input is
panned to L = Left C= Center R= Right
33
Mode Menu
Trim Level Indicator