Monitor Names; Track Names; Track Name Preset Edit; Note Presets Edit - Zaxcom Nomand User Manual

MAIN MENU

Monitor Names

The monitor naming menu is where the headphone monitor names that appear in the home screens are set. To
create a monitor name click on the HP number this will open the keyboard. Then use the keyboard to enter the
name can be entered from. When finished entering press and hold the menu knob or click OK.
Please note if a headphone name labeled "PLAY" is created when Nomad is in playback mode the headphone select
will automatically jump to PLAY preset, when stop is pressed Nomad will automatically return to the last preset
that was being listening to.

Track Names

The track names are then displayed within the card meters and are contained in the files metadata so post can
easily identify the source of a recorded track. To name a track select a track number and press the menu knob to
open the keyboard menu. To select from a preset track name press the PFL key to open the present track list.
To select from the list of preset names:
1. In the track name menu highlight the track to name by rotating the menu knob.
2. Press the PFL key.
3. Scroll to the preset name to be entered.
4. Press the menu knob.

Track Name Preset Edit

This menu is where the preset track names are entered. There are 20 track name presets available. Existing names
can be edited and new track names can be created. Each track name can be up to 22 characters long.

Note Presets Edit

This menu is where the preset notes are entered. There are 20 note presets available. Existing notes can edited and
new notes names can be created. Each note can be up to 22 characters long.

Warnings Setup

The warning setup menu manages the alerts that are pop up on the LCD
screen and audible alert sent to the main headphones. After a warning is
displayed, press the headphone knob to acknowledge and dismiss the
warning. Please note that there are separate user adjustable voltage cutoff
for both internal and external batteries – if internal batteries are not being
used it is recommended to turn the battery warning off
45
ENG Setup Menu