My Nomad Menu; Mirror Mode Options; Write Sound Report - Zaxcom Nomand User Manual

MAIN MENU

My Nomad Menu

Mirror Mode Options


OFF - Nomad will not mirror any files.

ON - Nomad will only start to mirror a file once the unit has gone into stop mode.

CONTINUOUS - When Nomad is recording, the audio is copied to the mirror card immediately after it is
written to the primary card. Depending on the track count, the mirror card may lag behind a bit.
Please note if mirroring is lagging too much many times there are items that are on and not needed. These items
will divert processing power from the mirroring and can often be shut off to conserve the processing power and
speed up mirroring. Check to see that some of these items are not unnecessarily on: bus assignments cross points,
compressor enables (input, output and card), high pass filters, notch filters, and delays.

Write Sound Report

When write sound report is selected, Nomad will create a sound report of the recorded files within the current
folder and write the report to the mirror CF card. The sound report contains the metadata information for those
files. Please note to write a sound report mirror mode must be set to OFF.
The My Nomad menu sets the parameters of the primary recording and
mirroring functions of Nomad.
Please note that Nomad will automatically create a new file when the file size
reaches 2GB. This will be a seamless transmission with no loss of audio. The
take number will add the letter a letter for each time Nomad creates a new file.
So for example if the first take is over 2GB the take numbers would be Take1
and Take 1a.
22
My Nomad / Recording Setup