Work Environment; Workstation Requirements - Stratasys Objet30 User Manual

Objet30 User Guide
Safety
Before being cured, resins are hazardous materials. To prevent possible health
Considerations
hazards, follow these precautions regarding printing materials:
• Do not expose to flames, heat or sparks.
• Prevent contact with skin and eyes.
• Ventilate areas where they are handled.
• Keep them separate from food and drink.
Cured plastic parts, however, are safe. They can be handled and stored
without precautions.
You can find more safety information about resins in:
"Safety Guidelines" on page 2-5
l
"First Aid for Working with Printing Materials" on page 2-8
l
Dispose of cartridges of model and support material in accordance with all
Disposal
applicable laws and regulations. If necessary, the cartridges can be
disassembled for recycling.

Work Environment

Extreme heat and humidity conditions can adversely affect the operation of
the Objet30 3D printer. Use ventilation or air-conditioning systems, if
necessary, to keep the work area within the following ranges:
• 18°–25°C (64°–77°F)
• 30%–70% relative humidity

Workstation Requirements

The requirements for client computers running PolyJet Studio are listed in
the Objet30 Site Preparation Guide.
To download this document, go to: www.stratasys.com/customer-
support/customer-resource-center/polyjet-customer-documents
DOC-34022 Rev. D
3 Introducing the Objet30 3D Printing System
3-6