Stratasys Objet30 User Manual page 130

Objet30 User Guide
6. Select the cartridge(s) you want to replace, and click Next.
7. From the drop-down menu, choose the material you want to install, and
The Model materials available for selection depend on your printer type
and license.
DOC-34022 Rev. D
❒ If the replacement cartridges are not loaded in the materials drawer,
the Compartment Selection screen appears.
Figure 6-15 Compartment Selection screen
click Next.
Figure 6-16 Material Selection screen
6 Operating and Maintaining the Objet30 3D Printer
6-16