Stratasys Objet30 User Manual page 139

Objet30 User Guide
4. Load the required cartridges, close the drawer, and confirm this in the
5. In the next wizard screen, confirm that the printer cover is closed, and
DOC-34022 Rev. D
wizard screen.
Figure 6-27 Cartridge confirmation screen—before flushing
Figure 6-28 Cartridge confirmation screen—before filling
click Next.
The wizard runs the material-flushing cycles.
Figure 6-29 Flushing cycles in progress
6 Operating and Maintaining the Objet30 3D Printer
6-25