Stratasys Objet30 User Manual page 107

Objet30 User Guide
The following operations are available on the Job Manager ribbon:
Group Icon
3D
Printer
Queue
Job
DOC-34022 Rev. D
Purpose
Client: Sets the server connection. See "Setting the Remote Printer Con-
nection (Client Mode)" on the previous page.
Server: Sets the printer connection. See "Setting the Printer Connection"
on page 5-67.
Configures options for printer alerts. See "Configuring User Alerts" on
page 5-75.
Server: Moves a job to the head of the Jobs Queue.
Client: Disabled.
See "Jobs Queue" on page 5-66.
Server: Moves a job to a higher position in the Jobs Queue.
Client: Disabled.
See "Jobs Queue" on page 5-66
Server: Moves a job to the bottom of the Jobs Queue.
Client: Disabled.
See "Jobs Queue" on page 5-66.
Server: Moves a job to a lower position in the Jobs Queue.
Client: Disabled.
See "Jobs Queue" on page 5-66.
Server:
• For a job in the Jobs Queue—Prints it again (from the beginning).
• For a job in the History list—Moves it to the Jobs Queue for printing.
Client: Disabled.
See "Restarting Jobs" on page 5-79.
Server: Stops a job in progress.
Client: Disabled
Server: Continues printing the current job from the point where printing
stopped.
Client: Disabled.
See "Resuming Jobs" on page 5-79.
Removes the selected job from the queue.
Refreshes the image of the selected job in the Tray Preview display.
Opens the Tray Settings screen and displays the tray. For deleted jobs,
this enables you to make changes before printing.
5 Using Objet Studio
5-73