Stratasys Objet30 User Manual page 77

Objet30 User Guide
DOC-34022 Rev. D
If the build tray file has not been saved, the Save As dialog box opens for
you to save it now.
Objet Studio checks if there is a problem with the positioning of objects
on the tray. If so, the affected objects are displayed with special colors (see
"Tray Validation" on page 5-40), and a warning message appears.
Figure 5-56 Tray validation warning message
❒ To cancel the Build command so you can correct the problem, click
No.
❒ To print the models as they are positioned on the tray, click Yes.
The Job Manager screen opens, so you can monitor the progress of your
trays—before, during, and after printing. See "Monitoring and Managing
Print Jobs" on page 5-64.
5 Using Objet Studio
5-43