Viewer Auto Setting All Together - Christie CCM-LX User Manual

Chapter 4 Controlling the Projector

Viewer auto setting all together

"Viewer auto display" can be set all together. Set "ON" the
multi control setting and select [3] Auto display from
Viewer sub menu (selected by 'Multi-control' - "Network
Viewer" menu). Set the display time periods and repeat
times for the auto image display. When clicking Start
button, the registered projectors start playing back the
auto image display in sequential.
For further information of the Auto display, see "Using the
network viewer function". ( p.98)
This is effective only if the multi control item of the regis-
tered projector sets to either "Both control" or "Visual con-
trol".
68
Downloaded from ProjectorsManual.com Manuals
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)