Table of Contents
Advertisement
CCM-LX User Manual
Downloaded from ProjectorsManual.com Manuals
020-000326-01 Rev.1 (10-2010)
Item
Description
Filter warning..... Sets the time to indicate the filter replacement
message on the screen. (OFF, 400H, 700H, 1000H)
Reset
Filter counter ....... Click
the projector when you replace the filter cartridge
with new one or roll-up the filter.
Filter control .......... Indicates the number of remaining times for the
filter scroll.
To roll-up the filter, click
SELECT
Reset
Click
times when you replace the filter cartridge with
new one.
The default number of scrolls remaining times is 9.
Don't reset the Filter control when the filter car-
tridge is not replaced.
Item
Description
Shutter .................... Sets the shutter operation. (ON: close, OFF: open)
Shutter
management ..... Sets the specified period of time when the pro-
jector shuts down after the projector is left with
the shutter closed.
* The specified time can be set 5 to 480 min.
Lamp control ...... Selects lamp control mode. (Auto, Normal, Eco1,
Eco2)
Lamp life
control .................... Selects lamp life control. (mode1, mode2)
Item
Description
Remote control ..... Sets the remote control code. (Code 1 - Code 8)
Fan speed control
Sets the fan control speed. (Normal, Max)
........
status ...............Indicates the current fan mode.
Factory default .......... Sets all of the projector control items to the fac-
tory default setting except the following items.
Lamp Corres. Value, PJ time, PIN code, Filter used
time, Scrolls remaining times.
* This function is not effective for the settings
of the network unit (Network address settings,
e-mail settings, etc.)
Setting up the projector
button to reset the filter use time of
Roll-up
button.
button to reset the scroll remaining
button and then
55
Advertisement
Table of Contents
