Installation And Network Configuration; Mounting - Christie CCM-LX User Manual

Chapter 2 Installation

[2] Installation and network configuration

Mounting

1.
Disconnect the AC plug from the projector.
2.
Remove the connector cover from the projector.
Keep the connector cover and the screws
importantly.
3.
Attach this product to the option connector and tighten two screws by using a coin
etc.
Caution
AC cord must be disconnected when mounting or removing this product otherwise it may dam-
age the product.
Connect the AC cord after connecting the LAN cable and computer.
18
Downloaded from ProjectorsManual.com Manuals
Screw
020-000326-01 Rev.1 (10-2010)
Connector cover
CCM-LX User Manual