Use Of Telnet - Christie CCM-LX User Manual

Chapter 7 Appendix

Use of telnet

You can control the projector by using the telnet application* installed on your computer.
Normally, the telnet application is available on your computer.
* The telnet 10000 port is used to control the projector.
Control
(For example, in case of using the Telnet application of the Windows XP Professional.)
1.
Select Run... submenu from Start menu on the computer. Type "telnet" onto the
Open text area on the displayed window and press OK button.
2.
The telnet application will start and the following window will be displayed. Type as
below to connect the projector.
> open 192.168.1.201 10000 [return]
* Use the IP address assigned to the projector
3.
When communication is established correctly, the word "PASSWORD:" appears on the win-
dow. Type the login password (Network PIN code) for the projector and then press "Enter"
key on the keyboard. If you do not set up the Network PIN code, just press "Enter" key. When
the word "Hello" is replied, login has been succeeded.
> open 192.168.1.201 10000 [return]
* The password "1234" is used for the example.
108
Downloaded from ProjectorsManual.com Manuals
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)