Christie CCM-LX User Manual page 62

Chapter 4 Controlling the Projector
Notes on timer setting
Up to 10 timer events can be registered. Timer events always operate according to the next valid
event depending on the projector's power status. In the example below, event 3 turns on the
projector so next event 4 (also turning on projector) will not be effective because the projector
is already turned on. Similarly, when the projector is turned off by event 5, event 6 OFF will not
be effective in turning it off again. But these secondary events (event 4 and event 6) will become
effective if a person turns off the projector (after event 3 and before event 4) or turns on the pro-
jector (after event 5 and before event 6).
Projector Power
When the timer events are set at the same time, the last event set will override the previous
events. For example, if there is an event like "ON at 8:00 everyday" and then new event is set like
"OFF at 8:00 everyday", only the last setting event is effective.
When the timer event
projector cannot be turned on during this cooling down period.
The timer operates by using the clock function provided in this product. Before setting the timer,
please confirm that the current date and time are set correctly. Timer and clock functions are
functioning using a lithium battery provided in this product. When the battery runs down, the
clock and timer functions will not operate correctly. Consult your local dealer for the replacement
of battery. The replacement must be carried out by a qualified service personnel.
60
Downloaded from ProjectorsManual.com Manuals
ON
OFF
Event 1 ON
Event 2
Event 3
Event 4
Event 5
Event 6
Time
occurs during cooling down period, this is invalid event because the
ON
Invalid event
ON
OFF
OFF
ON
ON
OFF
Invalid event
OFF
OFF
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)