Table of Contents
Advertisement
Chapter 3 Basic Setting and Operation
"Community". There are two access modes in a community, Refer (read) and Set (read- write).
This product allows to use Refer only (read only). The SNMP message informs the projector
status called "Trap" to an administrator. Click SNMP Setting on the main menu and set up
each item.
The SNMP agent provided with this product is based upon MIB-2 defined by RFC1213. For private
MIB information, refer to file "Mibinfo/13PjNetPlus2.mib" in the CD-ROM.
42
Downloaded from ProjectorsManual.com Manuals
SNMP setting
This product provides a SNMP (Simple Network Management Protocol)
agent function. The SNMP consists of a manager and agents. The group
which communicates information each other with SNMP is called
PJ information
Item
Contact .................. Enter user name of the projector etc. (optional)
Place ........................Enter place of the projector. (optional)
Community
name(refer) ........ Enter community name (read only). Default name
Description
is "public".
020-000326-01 Rev.1 (10-2010)
CCM-LX User Manual
Advertisement
Table of Contents
