Setting Up The Projector - Christie CCM-LX User Manual

Setting up the projector

Click Setting on the main menu. This function is to set up the projector.
Select the sub menu [Screen setting] or [Setting] and then set up each set-
ting.
Screen Aspect
Screen mode Video Computer
Normal
Full
Wide(16:9)
Zoom
True
Natural wide
Custom
The mark " " means that the available screen mode in the selected input source system.
*1 The error message appears when selecting the disabled screen mode indicated with "*1".
*2 Natural wide cannot be selected when 720p, 1035i, 1080i or 1080p is selected in AV system menu.
CCM-LX User Manual
Downloaded from ProjectorsManual.com Manuals
020-000326-01 Rev.1 (10-2010)
Item Description
Screen ..................... Switches the screen mode. (Normal, Full,
Wide(16:9), Zoom, True, Natural wide, Custom)
There may not be available mode depending on
the input source and the setting of Screen aspect
as shown in the table below.
Ceiling ..................... Sets the image top/bottom and left/right
reversed. (ON, OFF)
Rear ........................... Sets the image left/right reversed. (ON, OFF)
Screen aspect .... Sets the aspect. {Default(16:10), 16:9, 4:3}
Reset ........................ Resets the Screen settings.
Default(16:10)
Input source
Video Computer
*1
*2 *1
Setting up the projector
16:9
Input source
Video Computer
*1 *1
*1 *1
*2 *1 *1
4:3
Input source
*1
53