Christie CCM-LX User Manual page 23

2.
Configuration for IP Address/ Sub net/ Gateway*
Select "Network Setting" in the Network menu, and press SELECT button. The follow-
ing network setting pallet appears on the screen. Enter the specified network address-
es. In addition, "DHCP" is not available. (
The numerical value is a setting example.
How to enter the numbers
There are 2 ways to enter the numbers, one is by using the point buttons
remote control or on the projector, the other is by using the remote control 10-key but-
tons by which the numbers can be entered directory. For further information see "How
to enter the numbers with the remote control 10-key buttons". (
3.
Fixing the network configuration
After completing the entering of address, select "Set"
and press SELECT button. The network unit starts re-
booting and displays message "Please wait..." on the
screen until the re-booting is complete. Do not discon-
nect the AC cord during this period.
Completing of installation
Now the installation is complete. The IP address of this projector is set to "192.168.1.201".
Item Description
IP address .............Sets IP address of the projector.
Subnet ....................Sets Subnet mask. Normally sets [255.255.255.0].
Gateway* .............Sets IP address of the default gateway (Router).
1
DNS* 2 .......................Sets IP address of the DNS server. Must be set when using the e-mail function.
Refer to the projector's owner's manual for operation of the projector.
*1 In the network environments not using a Gateway or Router, the Gateway address should be set to [0.0.0.0].
*2 If you do not use the functions E-mail or DNS server, it is also set [0.0.0.0] for the DNS address.
CCM-LX User Manual
Downloaded from ProjectorsManual.com Manuals
020-000326-01 Rev.1 (10-2010)
Installation and network configuration
/DNS*
1
p.24)
Select an item with a orange
cursor by using the point but-
tons or
button.
Move the white
tially left or right with point but-
tons .
The number up or down with
point buttons
2
,and Press SELECT
cursor
sequen-
.
on the
p.23)
21