Control By The Projector - Christie CCM-LX User Manual

Chapter 6 Network Viewer
Error information
Error type
File Error
Connection Error
When the file error is occurred during the auto-display, you may have the alert e-mail message.
For further information, please see item "3 Option selection for sending alert mail". (

[2] Control by the projector

Select input mode of the projector to "Network" previously.
1.
Select "Network Viewer" in the "Network" menu. Press point button
ton.
2.
Select "Display mode" and press SELECT button, and then select "Auto" or "Manual" and
then press SELECT button. When selecting "Auto", set "Display length", "Endless play"
and "Repeat times".
3.
Select "Connect" and then press SELECT button to start displaying. The images in the
FTP server are displayed on the screen.
It enables you to browse the images by using the point buttons
on the projector.
: Previous image display,
4.
To end displaying, select "Disconnect" and then press SELECT button.
102
Downloaded from ProjectorsManual.com Manuals
Description
It is displayed when the network unit cannot acquire the correct file imag-
es from the FTP server, or when the master projector is turned off during
the multi-control.
Click Error button to check the details.
It may be displayed when the slave projector is using the Network Viewer
or Capture function during the multi-control. Check which projector has an
error , see item "Multi Control/Check & Change". (
PC1 PC2
PC3 PC4
Prog.
JPEG
Project JPEG
PJ2
images with PC2.
JPEG
PC5
: Next image display
p.65-66)
p.40)
PJ1
PC6
or SELECT but-
on the remote control or
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)