Network Pin Code Setting - Christie CCM-LX User Manual

Chapter 2 Installation

Network PIN code setting

The Network PIN code can be set to restrict access to the setting page of the projector
using the web browser.
Default Network PIN code [0000] means no Network PIN code is set.
1.
Displaying Network PIN code menu
Select network menu and then select "Network PIN code" sub menu. Press point but-
ton or SELECT button to display the Network PIN code entry pallet.
2.
Entering the Network PIN code
To enter the Network PIN code, use point buttons
remote control.
3.
Fixing the Network PIN code
After entering a 4-digit number, select "Set" by using point buttons
SELECT button.
The remote control 10-key buttons can be used for entering the Network PIN code. See item
"How to enter the numbers with the remote control 10-key buttons". (
It is recommended to set up the Network PIN code when you connect the projector to the net-
work. This setting is carried out through the projector's menu and also it can be set through the
network using the web browser. For further information, refer to item "Initial setting/Network PIN
code setting". (
Valid characters for the Network PIN code are only numbers 0 to 9. The number "0000" means no
Network PIN code is set.
This Network PIN code is not to restrict the use of the projector. This Network PIN code is to set
the security against the use of the projector through the network.
22
Downloaded from ProjectorsManual.com Manuals
p.35)
on the projector or the
Move the red frame sequentially left or right
with point buttons
Enter the nunbers with point buttons
p.23)
020-000326-01 Rev.1 (10-2010)
.
.
and then press
CCM-LX User Manual