Christie CCM-LX User Manual page 121

Q
How can I install several projectors equipped with the network unit?
A
Install and configure network one by one to avoid the IP address collision each
other. ( p.24)
To configure the IP address please see item "Network configuration". (
Q
How many projectors can I control with multi-control function?
A
It has been designed to control up to 100 sets but it depends on the network envi-
ronment.
Password/Login
Q
What should I do when I forget the password?
A
Select "Network PIN code" sub menu from "Network" menu on the projector. For
further information, please see item "Network PIN code setting". (
Q
Can I register the setting page as a web browser "Favorites" or
"Bookmarks"?
A
Please add "Login" page to your "Favorites" or "Bookmarks". Do not add the speci-
fied setting page because it will not be able to perform the password authentica-
tion correctly.
Operation
Q
Why can't I change the controls in the setting page with web browser?
A
Please make sure the projector is turned on. If it is in the standby mode, the setting
is not effective to the projector. To control the projector with a web browser, the
projector must be in the powered-on condition. Also, projectors registered for
multi-control cannot have any controls changed if they are in standby mode. But
timer and clock settings are always effective, even for projectors in standby mode.
CCM-LX User Manual
Downloaded from ProjectorsManual.com Manuals
020-000326-01 Rev.1 (10-2010)
Q&A
p.20)
p.22)
119