Control By The Projector - Christie CCM-LX User Manual

[3] Control by the projector

* PC provides the Network Capture.
PC1
PC3
Select input mode of the projector to "Network" previously.
1.
Select "Network Capture" in the Network menu and then press point button
SELECT button.
2.
Select "PC number" and press SELECT button and using point buttons
the PC number to connect, and then press SELECT button.
3.
Select "Connect" and then press SELECT button to start capturing. The screen image
of the selected computer will appear on the projected screen in real time.
4.
To end capturing, select "Disconnect" and then press SELECT button.
The IP address of the connecting PC should be registered previously. (
If the error message appears, check item "Parameter set up". (
The projector does not provide the function to register the IP address of the computer and to set
the parameter of the capturing. They should be registered by using the web browser previously.
( p.71-72)
CCM-LX User Manual
Downloaded from ProjectorsManual.com Manuals
020-000326-01 Rev.1 (10-2010)
Project a screen
image of PC1 with
PC2.
PC2
Capture
PC4
PC5
PJ2
PJ1
PC6
p.71)
Using the Real Time Capture
* Start capturing of
the PC1 from the
projector PJ2.
to Select
Set "On" when
using the wireless
mouse function
p.72)
or
75