Christie CCM-LX User Manual page 122

Chapter 7 Appendix
Q
Why does it sometimes take a lot of time to complete the page display?
A
The display speed of the page depends on the network environment in which both
the projector and computer are placed. It may take much time to complete the
page display if network traffic is heavy. Please consult your network administrator.
You can select the Light mode for displaying pages quickly. (
Q
I use many of the projectors in the network. How can I use names of the
projectors to recognize each projector instead of IP addresses?
A
You can manage the projectors with nicknames instead of the IP address. Please see
item "Multi-control" for further information. (
By registering the projector name and IP address with the DNS server, it can be
accessed with the nickname from the any computer referred to the DNS server.
Please consult your network administrator.
Q
How many numbers of the E-mail address can I register in the E-mail set-
ting page.
A
You can register up to 10 addresses.
Q
Why am I not receiving E-mail alert messages?
A
Make sure that the registered E-mail address and SMTP server address are correct. If
the SMTP server is located in your LAN (Local Area network), the address should be
set to the SMTP server in your LAN. The SMTP server located outside of your LAN
may not be available for security reason. For further information please contact your
network administrator. (
It may be required for the authentication depending on the SMTP server. This prod-
uct does not support this kind of SMTP server.
Others
Q
Can I control the projector by using the telnet application?
A
Possible. Please refer to the item "Control the projector with telnet". (
120
Downloaded from ProjectorsManual.com Manuals
p.63)
p.38)
p.30)
p.108)
CCM-LX User Manual
020-000326-01 Rev.1 (10-2010)