How To Enter The Numbers With The Remote Control 10-Key Buttons - Christie CCM-LX User Manual

How to enter the numbers with the remote control 10-key buttons

During the network address input mode or the network PIN code input mode, some of the
buttons on the remote control are operate as the 10-key input buttons.
1.
Select an item with the orange cursor by using the point buttons
button .
2.
Select a column with the white cursor by using the point buttons
3.
0 9
Press to key assigned to the buttons to enter the numbers.
* To change the number in a column, enter the number again.
4.
After entering the number in the column, press the point buttons
white cursor.
5.
Complete entering the number in the item, and p
6.
Repeat steps 1 to 5 for entering all the network address.
CCM-LX User Manual
Downloaded from ProjectorsManual.com Manuals
020-000326-01 Rev.1 (10-2010)
The numerical value is a setting example.
During the numbers
input mode, these
buttons operate as the
10 key buttons
The remote control may differ from each projector.
Installation and network configuration
or
or
ress SELECT button
.
press SELECT
, and
.
or
to move the
23