Engine Reassembly - HYOSUNG 2010 ST7 Service Manual

3-41 ENGINE
LEFT CRANKCASE BEARING
Drive in the bearings ① ② and ③
Bearing installer : 09913-70122
Bearing installer : 09913-76010
Install the oil seals ④ and ⑤
Apply SUPER GREASE A on the lip of oil seal.
SUPER GREASE A

ENGINE REASSEMBLY

The engine reassembly can be performed in the reverse
order of disassembly procedures. However, the follow-
ing points must be observed in the reassembly opera-
tion.
CAUTION
Make sure to coat the rotating and sliding
sections with engine oil.
CRANKSHAFT
NOTE
's crankshaft is imprinted with the
"GV7" letters.
Using the special tool, press the crankshaft into the
left crankcase.
Crankshaft installer : 09910-32812
Crankshaft installer adapter
CAUTION
Never fit the crankshaft into crankcase by striking
it with a plastic hammer.
Always use the special tool, otherwise crankshaft
alignment accuracy will be affected.
: 09910-32813
①
④
"GV7"
③
②
⑤