Engine Reassembly - HYOSUNG Aquil GV650 Service Manual

3-39 ENGINE
◈ LEFT CRANKCASE BEARING
● Drive in the bearings ①, ② and ③.
Bearing installer : 09913-70122
Bearing installer : 09913-76010
● Install the oil seals ④ and ⑤.
● Apply SUPER GREASE "A"on the lip of oil seal.
SUPER GREASE "A"

ENGINE REASSEMBLY

The engine reassembly can be performed in the reverse
order of disassembly procedures. However, the follow-
ing points must be observed in the reassembly opera-
tion.
CAUTION
Make sure to coat the rotating and sliding sec-
tions with engine oil.
◉ CRANKSHAFT
● Using the special tool, press the crankshaft into the
left crankcase.
Crankshaft installer : 09910-32812
Crankshaft installer adapter
CAUTION
Never fit the crankshaft into crankcase by strik-
ing it with a plastic hammer.
Always use the special tool, otherwise crankshaft
alignment accuracy will be affected.
: 09910-32813
①
④
③
②
⑤