Engine Reassembly - HYOSUNG Aquila 250 Service Manual

3-39 ENGINE
★ LEFT CRANKCASE BEARING
● Drive in the bearings
Bearing installer : 09913-70122
Bearing installer : 09913-76010
● Install the oil seals
● Apply SUPER GREASE "A"on the lip of oil seal.
SUPER GREASE "A"

ENGINE REASSEMBLY

The engine reassembly can be performed in the reverse
order of disassembly procedures. However, the follow-
ing points must be observed in the reassembly opera-
tion.
CAUTION
Make sure to coat the rotating and sliding sec-
tions with engine oil.
◉ CRANKSHAFT
● Using the special tool, press in the crankshaft into the
left crankcase.
Crankshaft installer : 09910-32812
Conrod holder : 09910-20115
CAUTION
Never fit the crankshaft into crankcase by striking
it with a plastic hammer.
Always use the special tool, otherwise crankshaft
alignment accuracy will be affected.
,
and .
.
and
④
⑤
①
②
③