HYOSUNG 2010 ST7 Service Manual page 238

● Install the steering stem upper bracket ① and wash-
er ②.
● Tighten the steering stem head nut ③ temporarily.
● Install the handlebars. (Refer to page 8-19)
● Tighten the handlebar holder nuts ④ to the specified
torque.
Handlebar holder nut
: 40 ~ 60 N· · m (4.0 ~ 6.0 kgf· · m)
● Align the upper surface of the front fork inner tube
with the upper surface of the steering stem upper
bracket.
● Tighten the upper front fork clamp bolts ⑤ to the
specified torque.
Front fork upper clamp bolt
: 22 ~ 35 N· · m (2.2 ~ 3.5 kgf· · m)
● Tighten the steering stem head nut ③ to the speci-
fied torque.
Steering stem head nut
: 80 ~ 100 N· · m (8.0 ~ 10.0 kgf· · m)
● Install the front turn signal lamp assembly.
● Install the front wheel. (Refer to page 8-9)
④
①
②
③
⑤
CHASSIS 8-34
③