Self-Diagnosis Reset Procedure - HYOSUNG 2010 ST7 Service Manual

SELF-DIAGNOSIS RESET PRO-
CEDURE
▣ ▣ A. LCD (DISPLAY) PANEL ① ①
● After repairing the trouble, turn the ignition switch
"OFF" position and turn "ON" position again.
● If "noEr" then CLOCK (LCD INDICATION ①) is
indicates, the malfunction codes are cleared.
● Disconnect the special tool from the dealer mode
coupler.
▣ ▣ B. "FI" CHECK LAMP ② ②
● Repair the trouble.
● Turn the ignition switch "OFF" position and turn
"ON" position, and wait for 10 seconds.
● Repeat the above procedure 30 times.
EI SYSTEM DIAGNOSIS 4-22
②
①
KEY