ENGINE OIL FILTER
Inspect Interval
Replace Initial 1,000 km and Every 6,000 km thereafter.
Drain the engine oil as described in the engine oil
replacement procedure.
Remove the oil filter cap
Remove the oil filter.
Install the new O-ring
Install the new oil filter.
Install the new O-ring
cap.
Install the oil filter cap.
CAUTION
Before installing the oil filter cap, apply engine oil
lightly to the new O-ring
OIL FILTER INSTALLATION
CAUTION
When install the oil filter, necessarily,
HYOSUNG character and 16510HN910 part s
NO. install to-ward the outside, otherwise can
damage the engine.
WARNING
Engine oil and exhaust pipes can be hot enough
to burn you.
Wait until the oil drain plug and exhaust pipes are
cool enough to touch with bare hands before
draining oil.
Add new engine oil and check the oil level as
described in the engine oil replacement procedure.
CAUTION
Use HYOSUNG MOTORS GENUINE OIL FILTER
only, since the other make s genuine filters and
after-market parts may differ filtering perfor-
mance and durability, which could cause engine
damage or oil leaks. Hyosung motors genuine oil
filter is also not usable for the motocycles.
and spring
to the oil filter
.
PERIODIC MAINTENANCE 2-14
①
INSERTED
DIRECTION
HYOSUNG
16510HN910
②
③
④
LUSTER MATERIAL
OUTSIDE