Clutch - HYOSUNG 2010 ST7 Service Manual

3-19 ENGINE

CLUTCH

With the primary drive gear held immovable using
the special tool, remove the clutch spring mounting
bolts diagonally.
Conrod holder : 09910-20115
Remove the disk pressure ①.
Remove the clutch drive plates NO. 1 and driven
plates.
Remove the spring washer and spring washer seat.
Remove the clutch drive plate NO. 2.
Flatten the lock washer ②.
With the clutch sleeve hub held immovable using
special tool, remove the clutch sleeve hub nut.
Clutch sleeve hub holder : 09920-53710
①
②