Engine Remounting - HYOSUNG 2010 ST7 Service Manual

3-9 ENGINE

ENGINE REMOUNTING

Reinstall the engine in the reverse order of engine
removal.
Install the engine mounting bolts, nuts and engine
mounting lock nuts with the special tool.
Engine mounting socket wrech (M20)
Tighten the engine mounting bolts, nuts and engine
mounting lock nuts to the specified torque.
Engine mounting bolt
: 15 ~ 30 N m (1.5 ~ 3.0 kgf m)
Engine mounting nut
: 45 ~ 70 N m (4.5 ~ 7.0 kgf m)
Engine mounting lock nut (M20)
: 35 ~ 50 N m (3.5 ~ 5.0 kgf m)
Tighten the frame down tube mounting bolts
specified torque.
Frame down tube mounting bolt
: 22 ~ 35 N m (2.2 ~ 3.5 kgf m)
③
③
: 09940H30010
,
to the
③
⑤
CAUTION
of engine mounting bolt ① ① align
Set the part
center line by the hand temporarily and install the
engine mounting bolt to the specified torque.
If otherwise, it is damage to the thread of engine
mounting bolt.
NOTE
Set the part of swingarm pivot shaft
center line by the hand temporarily and install the
swingarm pivot shaft to the specified torque.
Swingarm pivot shaft
: 15 ~ 30 N m (1.5 ~ 3.0 kgf m)
Swingarm pivot nut
: 50 ~ 70 N m (5.0 ~ 7.0 kgf m)
Swingarm mounting lock nut (M26)
: 70 ~ 80 N m (7.0 ~ 8.0 kgf m)
①
④
②
align
①