Front Fork Oil - HYOSUNG 2010 ST7 Service Manual

● Fit the stopper ring ② and dust seal ①.
CAUTION
Make sure that the stopper ring is securely fitted
into the groove on the outer tube.
① Dust seal
② Oil seal stopper ring
③ Oil seal
④ Oil seal retainer
⑤ Slide metal
● Fit the rebound spring ⑦ on the damper rod ⑥ and
install them together to the inner tube.
● Apply THREAD LOCK 1324 to the damper rod bolt
⑨.
● With the damper rod held immovable, with the gasket
⑧ fitted, tighten the damper rod bolt ⑨.
Front fork damper rod bolt
: 20 ~ 30 N· · m (2.0 ~ 3.0 kgf· · m)
THREAD LOCK " " 1324 " "
CAUTION
Replace the gasket with a new one.

FRONT FORK OIL

● With the inner tube in fully compressed position, pour
the specified amount of fork oil and stroke the tube
several times to expel air.
Front fork oil specification
Front fork oil capacity
● With the front fork held in vertical position, com-
press the inner tube all the way.
: TELLUS #32
Each leg
370 4 cc
①
②
③
④
⑤
⑦
⑥
⑨
⑧
CHASSIS 8-26