0850" Gp Or Clutch Lever Switch Circuit Malfunction - HYOSUNG 2010 ST7 Service Manual

4-49 EI SYSTEM DIAGNOSIS

"0850" GP or CLUTCH LEVER SWITCH CIRCUIT MALFUNCTION

LCD (DISPLAY) INDICATION
0850
DETECTED CONDITION
☞ ☞ Refer to page 4-26
▣ ▣ INSPECTION
1) Remove the frame cover.
2) Turn the ignition switch "OFF" position.
3) Check the GP switch and clutch lever switch cou-
pler for loose or poor contacts.
If OK, then measure the GP switch and the clutch
lever switch resistance.
4) Park the motorcycle on a firm, flat surface vertical-
ly.
5) Disconnect the GP switch coupler ① and then
check the continuity between L wire and ground
when gearshift lever is shifted to the neutral state.
GP switch continuity
Tester knob indication : Resistance (
"FI" CHECK LAMP INDICATION
[ 0 8
● GP switch circuit open or short.
● GP switch malfunction.
● Clutch lever switch circuit open or short.
● Clutch lever switch malfunction.
● ECU malfunction.
Ω
0
(L - Ground)
Ω Ω
)
5 0
POSSIBLE CAUSE
0 8 ]
①