Special Tools - HYOSUNG 2010 ST7 Service Manual

9-15 SERVICING INFORMATION

SPECIAL TOOLS

Special tools Part Number Part Name Description
09900-20101
Vernier Caliper
Used to conveniently measure various dimensions.
09900-20201
Micrometer (0~25mm)
Used for precise measurement (00~25mm measure ranges).
09900-20202
Micrometer (25~50mm)
Used for precise measurement (25~50mm measure ranges).
09900-20203
Micrometer (50~75mm)
Used for precise measurement (50~75mm measure ranges).
09900-20204
Micrometer (75~100mm)
Used for precise measurement (75~100mm measure ranges).
09900-20508
Cylinder gauge set
Measure inside diameter of cylinder.
09900-20605
Dial calipers
Meassure width of conrod big-end.
09900-20606
Dial gauge
Meassure oscillation of wheel with using magnetic stand.
09900-20701
Magnetic stand
With using dial gauge.
Special tools Part Number Part Name Description
09900-20806
Thickness gauge
Measure clearance of piston ring.
09900-21109
Torque wrench
Measure torque of tightening.
09900-21304
V-block
With using magnetic stand.
09900-22301
Plastigauge
Measure clearance of crankshaft thrust.
09900-22401
Small bore gauge
Measure inside diameter of conrod small-end.
09900-25002
Pocket tester
Measure voltage, electric current, resistance.
09900-25008
Multi circuit tester set
Inspect thermo-switch or temperature sensor.
09900-26006
Engine tachometer
Measure rotational frequency of engine.
09900-27000
Mode select switch
Inspect EI system sensor.