Adjusting The Valve Play; How To Remove The Tank (Tc-Txc) - Husqvarna TE 250-450-510/2008-I.E. Owner's Manual

Cap6_GB 9-07-2007 16:09 Pagina 36

ADJUSTING THE VALVE PLAY

To check the valve clearance, proceed as follows , WITH COLD
ENGINE:
First turn counterclockwise fastening rear pin (1) then remove
the saddle.
2
3
36

HOW TO REMOVE THE TANK (TC-TXC)

Close the fuel tap (2) and loosen the strap (3) on the connect-
ing pipe to the carburettor, pull the pipe out of the carburettor.
Remove the screws (4) and the side panels.
4
A
Remove the locking screw (A) and pull out the tank with its
conveyors.