Table For Lubrication, Supplies; Agip Racing 4T (10W - Husqvarna TE 250-450-510/2008-I.E. Owner's Manual

Cap1_GB 11-07-2007 16:44 Pagina 12
DIMENSION, WEIGHT, CAPACITY
Wheelbase (TC-TE-TXC) ................................................58.86 in.
Wheelbase (SMR).............................................................56.89 in.
Overall length (TC)......................................................86.89 in.
Overall length (TE)......................................................89.25 in.
Overall length (SMR) ...............................................................85.94 in.
Overall length (TXC).................................................................86.42 in.
Overall width ..............................................................32.28 in.
Overall height (TC-TE-TXC) ...........................................50.59 in.
Overall height (SMR)........................................................49.21 in.
Saddle height (TC).......................................................38.11 in.
Saddle height (TE-TXC).................................................37.91 in.
Saddle height (SMR) ........................................................36.22 in.
Minimum ground clearance (TC-TXC-TE) ............................11.81 in.
Minimum ground clearance (SMR).....................................9.64 in
Dry weight (TC 250) .................................................. lb 220.5
Dry weight (TC 450) ...................................................lb 230.4
Dry weight (TC 510) ................................................... lb 231.5
Dry weight (TXC 250) ...... .......................................... lb 229.3
Dry weight (TXC 450) ................................................. lb 240.0
Dry weight (TXC 510) ................................................. lb 240.3
Dry weight, "ready to race" (TE 250 I.E.) ....................lb 235.9
Dry weight, "ready to race" (TE 450-510 I.E.) ............. lb 246.9
Dry weight, "ready to race" (SMR 450-510 I.E.) .... ..... lb 260.1
12
Fuel tank capacity
............(TE-SMR, 1.5 Imp. Quarts, 1.9 U.S. qt. reserve included)
. .......................................................1.6 imp.gall, 1.9 U.S. gall.
Coolant capacity.....................................Imp. Quarts 0.97÷1.14
...............................................................U.S. Quarts 1.16÷1.37
Transmission oil
Oil and oil filter replacement .....Imp. Quarts 1.5U.S. Quarts 1.8
Oil replacement .........................Imp. Quarts 1.3U.S. Quarts 1.6

TABLE FOR LUBRICATION, SUPPLIES

Engine, gearbox and primary drive lubricating oil

AGIP RACING 4T (10W-60)

Engine coolant
AGIP COOL
Brake system fluid
AGIP BRAKE 4 (DOT 4)
Clutch fluid
SAE 10 MINERAL OIL FOR HYDRAULIC SYSTEM
Grease lubrication
AGIP BIKE GREASE
Final drive chain lubrication
AGIP CHAIN LUBE
Front fork oil
AGIP FORK 7,5 (SAE 7,5) (for hard climatic conditions SAE 5)
Oil for rear shock absorber
AGIP FORK 2,5 (SAE 2,5)
Electric contact protection
AGIP CONTACT CLEANER
Fillers for radiator
AREXONS TURAFALLE LIQUIDO