Speed (Kmh Or Mph) / Odo / Rpm; Speed / H / Rpm; Speed / Clock / Rpm (Figure 3) - Husqvarna TE 250-450-510/2008-I.E. Owner's Manual

Cap3_GB 9-07-2007 16:22 Pagina 17
1- SPEED (kmh or mph) / ODO / RPM (fig-
ure 1)
- SPEED: motorcycle speed- maximum value: 299 kmh or 299
mph;
- ODO: odometer- maximum value: 99999 km;
- RPM: engine r.p.m. shown on the vertical LED indicator.
To replace kilometers with miles or miles with kilometers pro-
ceed as follows:
1) set to figure 1, stop the engine and push the knob SCROLL
(A);
2) start the engine while pushing for 3 seconds the knob
SCROLL (A).
After the kilometers-miles or miles-kilometers setting opera-
tion, for 3 seconds, "SET" and miles/mph or km/kmh will be
on.
NOTE
After the previously described operation,
the ODO setting will be convert and all the
others data will be reseted (the H Counter
is unchanged).
2- SPEED / H / RPM (figure 2)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299 mph;
- H: shows the running hours of the engine (data are saved in
permanent memory every 10 minutes)- Maximum value:
9999:59;
- RPM: engine r.p.m. shown on the vertical LED indicator.

3- SPEED / CLOCK / RPM (figure 3)

- SPEED: motorcycle speedmaximum value: 299 kmh or 299
mph;
- CLOCK: clock- Reading from 0:00 to 23:59:59 (the data will
be lost after battery detachment);
To reset the clock, push the knob SCROLL (A) for more than 3
seconds in order to increase the hours; release the knob and
then, after 3 seconds, it is possible to increase the minutes;
- RPM: engine r.p.m. shown on the vertical LED indicator.
17