Tampering Warning; Warning Statement - Husqvarna TE 250-450-510/2008-I.E. Owner's Manual

Table of Contents

Available languages

Tampering warning

Tampering with Noise Control System Prohibited.

Federal law prohibits the following acts or causing thereof:

(1) The removal or rendering inoperative by any person other

than for purposes of maintenance, repair, or replacement,

of any device or element of design incorporated into any

new vehicle for the purpose of noise control prior to its

sale or delivery to the ultimate purchaser or while it is in

(2) the use of the vehicle after such device or element of de-

sign has been removed or rendered inoperative by any

Among those acts presumed to constitute tampering are the

acts listed below.

1) Removal of, or puncturing the muffler, baffles, header pipes

or any other component which conducts exhaust gases.

2) Removal or puncturing of any part of the intake system.

3) Lack of proper maintenance.

4) Replacing any moving part of the vehicle, or parts of the

exhaust or intake system, with parts other than those speci-

fied by the manufacturer.

This product should be checked for repair or replacement if the

motorcycle noise has increased significantly through use.

Otherwise, the owner may become subject to penalties under

state and local ordinances.