Engine Start (Tc-Txc) - Husqvarna TE 250-450-510/2008-I.E. Owner's Manual

Cap5_GB 9-07-2007 16:25 Pagina 26

ENGINE START (TC-TXC)

Proceed as follows:
1) make sure the fuel tap (A) is in the Open position;
2) shift gear pedal (1) in neutral positio.
A
1
TC
26
3) pull the starter knob (BLACK knob 2 for cold starting*,
RED knob 3 for warm starting)
*: after a prolonged inactivity of the motorcycle or in presence
of a low external temperature.
2
3
TXC
4) lower the starter pedal (4) until a certain resistance is no-
ticed (piston at T.D.C.);
4
TC-TXC