Pads Cleaning; Pads Installation - Husqvarna TE 250-450-510/2008-I.E. Owner's Manual

Table of Contents

Available languages

PADS CLEANING

Be careful that no disc brake fluid or any oil gets on brake

pads or discs. Clean off any fluid or oil that inadverently gets

on the pads or disc with alcohol.

Replace the pads with new ones if they cannot be cleaned satis-

- Install new brake pads.

- Reassemble the two pins (2) and the springs (1).

Do not attempt to ride the motorcycle until

the brake lever or pedal are

fully effective. Pump the brake lever or

pedal until the pads are against the discs.

The brake will not function on the first ap-

plication of the lever or pedal.