Adjustment Of Front Brake Control Lever And Fluid Level Control (Te-Tc-Txc- Smr) - Husqvarna 2009 TE 310 Workshop Manual

TE-TC-TXC
TE-TC-TXC
SETTINGS AND ADJUSTMENTS
Adjustment of front brake control lever and fluid level control (TE-TC-TXC-
SMR)
On the SMR model the lever position can be adjusted (4 adjustments) for any driver
hand size. To decrease the lever distance from the handle grip, turn the adjuster (B)
CLOCKWISE. To increase the lever distance from the handle grip, turn the adjuster
(B) COUNTERCLOCKWISE. On the TE, TC and TXC models the adjuster (2),
located on the control lever, allows adjusting of the free play (a).
Free play (a) must be at least 3 mm (0.1 in.). The level of the fluid in pump
reservoir must never be below the minimum value (1), which can be checked from
the window on the rear side of the pump body (TE, TC and TXC). For SMR model,
check the level on the fluid reservoir. A decrease of the fuel level will let
air into the sustem, hence an extension of the level stroke.
SMR
: If the brake lever feels mushy when it is applied, there may be air in the
brake lines or the brake may be defective: CHECK THE BRAKING
SYSTEM (page L.2).
: If the lever free play is excessive, the brake action can decrease: CHECK
THE PADS THICKNESS (page L.5).
Do not spill brake fluid on to any painted surface or lenses (e.g. headlamp).
Do not mix two brands of fluid. Change the brake fluid in the brake line if
you wish to switch to another fluid brand.
Brake fluid may cause irritation. Avoid contact with skin or eyes. In case of
contact, flush thoroughly with water and call a doctor if your eyes were
TE-TC-TXC
exposed.
A: to encrease clearance
B: to decrease clearance
SMR
D.12 Part. N. 8000 H0368 (09-2008)