Husqvarna TE 250-450-510/2008-I.E. Owner's Manual page 120

Cap3_GB 9-07-2007 16:22 Pagina 18
4- SPEED / TRIP 1 / RPM (figure 4)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299
mph;
- TRIP 1: distance- maximum value: 999.9 km (the data will
be lost after battery detachment).
If the STP 1 will be set to zero, the functions TRIP 1 and AVS
1 will be set to zero too.
The function TRIP 1 is ON unitedly with the
function STP 1 (*).
- RPM: engine r.p.m. shown on the vertical LED indicator.
(*): see figure 5
18
5- SPEED / STP 1 / RPM (figure 5)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299
mph;
- STP 1: miles/kilometers covered time- Reading from 0:00 to
23:59:59 (the data will be lost after battery detachment).
To activate the function STP 1, push the knob SCROLL (A) for
more than 3 seconds.
- 1st step: function ON;
- 2nd step: stop to the counters;
- 3rd step: STP 1 zero-setting; TRIP 1 and AVS 1 data zero-setting;
- 4th step: function ON;
- 5th step: stop to the counters;
.............................
and so following
NOTE
STP 1 data+TRIP 1 data=AVS 1 (*).
- RPM: engine r.p.m. shown on the vertical LED indicator.
(*): see figure 6
6- SPEED / AVS 1 / RPM (figure 6)
- SPEED: motorcycle speedmaximum value: 299 kmh or 299
mph;
- AVS 1: shows the covered average speed of the motorcycle,
according with a distance (TRIP 1) and a miles/kilometers
covered time (STP 1) (the data will be lost after battery de-
tachment).
NOTE
If the STP 1 will be set to zero, the TRIP 1 and AVS 1 functions
will be set to zero too.
- RPM: engine r.p.m. shown on the vertical LED indicator.