Replacing A Lens - Christie CP2000-XB Setup Manual

Section 4: Maintenance
4.4

Replacing a Lens

A variety of primary lenses can accommodate different throw distances and specific types of
installations—refer to section 6 of the CP2000-XB User Manual (020-100163-xx). To replace or change a
lens:
1. Release the lens-locking lever (UP position).
2. Pull out lens and replace with a different primary lens as described in
and Cooling.
3. Secure with lens locking lever (down position).
4. Calibrate the lens. See
4-8
Section 2.10 Basic Image Alignment
Section 2.4 Installing a Lens, Lamp
for details.
CP2000-XB Setup Guide
020-100250-02 Rev. 1 (06-2009)