The Projector; New Features; List Of All Features - Christie CP2000-XB Setup Manual

Digital cinema projector
Hide thumbs Also See for CP2000-XB:
Table of Contents

Advertisement

1.3

The Projector

1.3.1 New Features

• Motorized Lens Mount automates the process of setting the Focus, Horizontal (X) and Vertical (Y) Offset,
and Zoom. NOTE: TPC version 2.9 higher is required.

1.3.2 List of All Features

• DLP Cinema 3-chip electronics with 2048 x 1080 native resolution (2D or 3D)
• Versatile electronic and optical scaling to fill wide screens
• CineBlack and CinePalette for deep film-like blacks and superior colorimetry
• CineCanvas for flexible telecine-grade resizing, subtitling, and other text and graphic overlays
• Two SMPTE 292M cinema inputs, used individually or simultaneously for high-speed dual-link processing,
and each supporting CineLink local link encryption
• Dual DVI (Digital Visual Interface) connectors for alternative non-cinema content, used individually or
simultaneously for high-speed dual-link processing.
• Can be rigged, flown and/or stacked with adjustable FredFrame
• Choice of 4 Xenon bubble lamp sizes and ratings
• Universal 3-phase 7 kW switching ballast for all lamps and countries
• Screen brightness: Up to 14 fL on 90 ft. screen
• Achievable contrast ratio 2000:1 full field on/off in center.
• LampLOC
motorized lamp alignment (automatic or custom bulb positioning)
• LiteLOC
for maintaining brightness over time
• Simple single-button Start Feature function via Touch Panel Controller
• Auto-detection of a variety of SMPTE 292M input formats (incoming interlaced formats require proper 3:2
or 2:2 pull-down time code)
• Internal douser (shutter) for quick picture muting and cool stand-by mode
• Bit depth of 45 bits, 35.2 trillion colors.
• New ruggedized lens mount that accepts the new High Brightness (HB) lenses as well as previously avail-
able High Contrast (HC) lenses.
• Choice of High Brightness and High Contrast zoom lenses
• Optional Motorized Auxiliary Lens Mount (for 1.25x anamorphic or 1.26x wide converter lenses)
• Communication ports for remote control of the projector via PC or other controller
• High-security tamper-resistant lid lock with all access electronically monitored
• DC2K 3D Triple Flash functionality, capable of projecting full resolution 3D images under a 6:2 frame rate
multiplication. NOTE: DLP version 13 series or higher is required.
• HDCP decryption on both DVI inputs allows display of copy protected alternate content.
CP2000-XB Setup Guide
020-100250-02 Rev. 1 (06-2009)
rigging hardware
(from 1.25:1 up to 8.5:1)
Section 1: Introduction
1-3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents